 |
| |
|
| |
Here are some of the frequently asked questions we get about BlingX.
|
How do BlingX work? |
|
|
BlingX work by
allowing you to put a small ultra bright LED any where on your wheel. They can even be hidden behind the spokes. The light from the LED reflects off your wheel surfaces and illuminates the
wheel.
|
|
How
do BlingX attach to the wheel? |
|
|
BlingX attach to
your wheels using a high performance tape from 3M called VHB (Very High
Bond). 3M VHB tape is specially designed to take the heat, shock and
G-force encountered on the wheel.
|
|
How strong is the 3M VHB tape? |
|
|
The 3M VHB tape is capable of withstanding speeds much greater than most
cars can achieve, 130 Mph+. It is impervious to Water, Salt Water, Oil & Anti Freeze and is rated to 400 Deg F. The most important factor in the tape
strength is having a clean surface to stick to. We include a Alcohol
cleaning pad with every package to help you make sure all wax grease dirt
and grim are removed from the mounting surface.
|
|
How
are the BlingX LEDs powered? |
|
|
BlingX use 3
standard LR1130 watch batteries to power the light. They are easily
replaceable.
|
|
How long will the batteries last? |
|
|
The batteries will last
2-3 months or more with normal use. If you were to turn them on and
leave them on they will last over 4 days of continuous use.
|
|
How
do you turn on the BlingX LEDs? |
|
|
BlingX use a
quick and easy on/off switch located on the back of the housing.
. 
|
|
Do the lights flash or stay on? |
|
|
The BlingX LED
uses a very fast continues flash and will not turn on off until you hit
the on/off switch. Their are several advantages to this. Flashing lights
draw more attention & it drastically increases your battery life.
|
|
Are they water proof? |
|
|
BlingX LEDs have
gone thru extensive submersions test to make sure they are water proof and
use 2 rubber seals to keep the water out.
|
|
How small are the BlingX LEDs? |
|
|
They are 1 1/2
inches long by 3/4 of a inch wide.
 |
|
What are they made of? |
|
|
The housing is
made of a high strength and light weight T6 Aluminum that has been chrome
plated. The clear cap is made of a high strength acrylic plastic.
|
|
How many BlingX LED's did you use on the Denali in the video? |
|
|
2 Tri-Color
BlingX LEDs where used per wheel to produce the result in the
video. More can be used for more dramatic results.
|
|
How are they installed? |
|
|
BlingX are very easy to install. Wash your wheels as you normally would
with soap & water. Dry the wheels. Using the alcohol swab provided wipe
down the ¾ by 1 ½ inch flat area where you want to place the BlingX LED.
Peel off the protective tape covering. Apply to wheel in desired position.
Apply medium pressure to the BlingX housing for 30 seconds to speed up the
bonding process to the wheel. Repeat and be blown away by the results.
|
|
Can I reposition the LEDs after they have been installed? |
|
|
No, after the
LEDs have set and cured they cannot be repositioned. The LED can be
removed and reused, but you will need to purchase new BlingX 3M VHB adhesive
strips to properly reinstall the LED's to wheels.
|
|
Are BlingX legal to use on the street? |
|
|
You will need to consult with your
local city / state ordinances to determine if they are legal to use in your
area.
|
|
If you still have questions, please feel free to contact us. |
|
|
|
|
 |
|
|
